|
RegCom
The
Regcom is an interface device that allows the connection of multiple
cash register terminals to a master unit for the purpose of
transaction logging. The Regcom is a “slave” device and can connect
directly to a VSI-Pro, Interface Adapter, P2RS, TCP232 or ECR card.
One master device called the “Hydra” can be connected to a maximum
of 16 slave devices.
| Manual | |
|
Hydra
The Hydra is an interface device that
allows the connection of multiple cash
register terminals using the Regcom/Networker/Vnetworker slave units for the purpose of
transaction logging.The Hydra receives RS-485 data from the Regcom/Networker/ Vnetworker
networks and converts this to an RS-232 format that DVRs or the VSI-Pro can read.
| Manual | |
|
Hydra TCPIP 232
The Hydra TCPIP232 is a special operation mode of the
TCPIP232 adapter. This allows the unit to be a Master or Hydra unit
which can receive data from up to 16 VSI-Pro Max, P2RS-Pro or
TCPIP232 over the AVE RS-485 network from a POS / Cash Register and
convert this data to TCP/IP protocol which is sent over the Ethernet
LAN to a DVR, NVR or PC.
| Manual |
|
|
Vnetworker
The Vnetworker connects inbetween a VSI-Pro and
the Cash Register via RS-232. The Vnetworker is similar to the
Networker and Regcom which take the RS-232 data and put it on a
common RS-485 network and send back to a DVR or PC. This network
supports up to 64 Vnetworkers. The Vnetworker is an enhanced version
of the Networker and is able to program the VSI-Pro remotely along
with gathering the transaction or exception data. The VSI-Pro must
be Ver. 13.00 or 13.24 and Release 12 or higher. Any VSI-Pro Ver.
13.00 or 13.24 can be upgraded with a uP software change for the
hardware of the VSI-Pro remains the same.
| Manual |
Software |
|
|
Networker
The RS-485 Networker is designed to convert the
RS-232 serial port output of the VSI-Pro to
be a poll / select network. This allows the exceptions
or all the data to be collected by one computer
or DVR for up to 64 VSI-Pros.
| Manual |Software |
|
