VIDEO MOTION DETECTORS

Reliable and cost-effective, these units are widely used to secure indoor areas. Their compact size, low voltage requirements, and simple on-screen programming menus make them excellent for covert applications. Single, Four and 16 Channel Rack Units.

| VMD 1001 | | VMD 1004 | | DS-1PL | | DS-16 | | DS1-PL-MS PCB |

  | DS-20-OF |

The DS-LAN allows connection of either the DS1-PL or DS16 rack to any Ethernet LAN using Cat 5 cabling. In conjunction with our DSVMD sofware and included cables the connection is seemless. User programming of the adapter IP is done via any laptop via the serial port. Once programmed it is stored in nonvolatile memory permanently.

| Manual | | DSVMD Software | | Cutsheet |

9 and 16 Camera Video Motion Detector

9 or 16 Channel MultiDisplay Video Motion Detector with One Digital and 2 Analog Monitor Outputs. Integrated 16X3 Mini Matrix Switching and multiscreen display gives this device display versatility. Independent camera masking areas, sensitivity and target size for Indoor or Fixed Lighting Outdoor Motion Detection applications. One common alarm output but when used in conjuntion with the AL-16 will give 16 independent camera alarm outputs. Full remote programming software included.

| MS-9 | | MS-16 | | MTIUDL Software |

Remote Keyboard

Remote Keyboard the MTI-16CD-VMD 16 Channel Video Motion Detector. Operates via the RS-232 port on the rear of the unit and functions in parallel with the front panel keyboard. Power is supplied by the VMD in the DB9 Connector or 12VDC external power source directly to the keyboard.

AL-16

The Alarm Box provides individual alarm outputs from a Multiplexer.  One can set addresses on the Alarm Box for 256 addresses (0-255) on the Multiplexer.  The Alarm Box has a master alarm output that is active when any of the other channels are active.

| Manual |